Хатҳои пайвасткунӣ

Contents

# Васлкунанда

Васлкунак

Open the Connectors toolbar, where you can add connectors to objects in the current slide. A connector is a line that joins objects, and remains attached when the objects are moved. If you copy an object with a connector, the connector is also copied.

There are four types of connector lines:

1. Standard (90-degree angle bends)

2. Line (two bends)

3. Straight

4. Хамида

When you click a connector and move your mouse pointer over a filled object, or the edge of an unfilled object, gluepoints appear. A gluepoint is a fixed point where you can attach a connector line. You can add custom gluepoints to an object.

To draw a connector line, click a gluepoint on an object, drag to a gluepoint on another object, and then release. You can also drag to an empty part of you document and click. The unattached end of the connector is locked in place, until you drag the end to a different location. To detach a connector, drag either end of the connector line to a different location.

## Васлкунак

Draws a connector with one or more 90-degree angle bends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Васлкунак

## Хати пайвастшавӣ бо тирча дар аввал

Draws a connector with one or more 90-degree angle bends and an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавӣ бо тирча дар аввал

## Хати пайвастшавӣ бо тирча дар охир

Draws a connector with one or more 90-degree angle bends and an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавӣ бо тирча дар охир

## Хати пайвастшавӣ бо тирчаҳо

Draws a connector with one or more 90-degree angle bends and arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавӣ бо тирчаҳо

## Хати пайвастшавӣ бо давра дар аввал

Draws a connector with one or more 90-degree angle bends and a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавӣ бо давра дар аввал

## Хати пайвастшавӣ бо давра дар охир

Draws a connector with one or more 90-degree angle bends and a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавӣ бо давра дар охир

## Хати пайвастшавӣ бо давраҳо

Draws a connector with one or more 90-degree angle bends and circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавӣ бо давраҳо

## Хати пайвастагӣ

Draws a connector that bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Хати пайвастагӣ

## Хати пайвастшавӣ бо тирча дар аввал

Draws a connector that starts with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Хати пайвастшавӣ бо тирча дар аввал

## Хати пайвастшавӣ бо тирча дар охир

Draws a connector that ends with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Хати пайвастшавӣ бо тирча дар охир

## Хати пайвастшавӣ бо тирчаҳо

Draws a connector that bends near a gluepoint and has arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Хати пайвастшавӣ бо тирчаҳо

## Хати пайвастшавӣ бо давра дар аввал

Draws a connector that starts with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Хати пайвастшавӣ бо давра дар аввал

## Хати пайвастшавӣ бо давра дар охир

Draws a connector that ends with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Хати пайвастшавӣ бо давра дар охир

## Хати пайвастшавӣ бо давраҳо

Draws a connector that bends near a gluepoint and has circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Хати пайвастшавӣ бо давраҳо

## Хатти пайвасткунии рост

Draws a straight line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хатти пайвасткунии рост

## Хати пайвастшавӣ бо тирча дар аввал

Draws a straight line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавӣ бо тирча дар аввал

## Хати пайвастшавии рост бо тирчаҳо

Draws a straight line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии рост бо тирчаҳо

## Хати пайвастшавии рост бо тирчаҳо

Draws a straight line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии рост бо тирчаҳо

## Хати пайвастшавӣ бо давра дар аввал

Draws a straight line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавӣ бо давра дар аввал

## Хати пайвастшавии рост бо давраҳо

Draws a straight line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии рост бо давраҳо

## Хати пайвастшавии рост бо давраҳо

Draws a straight line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии рост бо давраҳо

## Хатти пайвасткунии хамида

Draws a curved line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хатти пайвасткунии хамида

## Хати пайвастшавии хамида бо тирча дар аввал

Draws a curved line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии хамида бо тирча дар аввал

## Хати пайвастшавии хамида бо тирча дар охир

Draws a curved line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии хамида бо тирча дар охир

## Хати пайвастшавии хамида бо тирчаҳо

Draws a curved line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии хамида бо тирчаҳо

## Хати пайвастшавии хамида бо давра дар аввал

Draws a curved line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии хамида бо давра дар аввал

## Хати пайвастшавии хамида бо давра дар охир

Draws a curved line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии хамида бо давра дар охир

## Хати пайвастшавии хамида бо давраҳо

Draws a curved line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Хати пайвастшавии хамида бо давраҳо

Мавзӯҳои алоқаманд

Сохтани диаграмаи вобастагиҳо