#	$NetBSD: MMEYE,v 1.14.4.1 2002/08/01 04:25:44 lukem Exp $
#
#	GENERIC -- everything that's currently supported
#

include "arch/mmeye/conf/std.mmeye"

#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

maxusers	16		# estimated number of users

# CPU support
options		SH3
options 	SH7708R		# 100MHz
options 	MMEYE
options 	MMEYE_NEW_INT
#options 	MMEYE_NO_CACHE
options 	PCLOCK=33330000		# 33.33MHz
options 	INITTODR_ALWAYS_USE_RTC

# Standard system options
#options 	UCONSOLE	# users can use TIOCCONS (for xconsole)
#options 	INSECURE	# disable kernel security levels

options 	HZ=50		# clock interrupt generates every 1/HZ sec
#options 	NTP		# NTP phase/frequency locked loop

options 	KTRACE		# system call tracing via ktrace(1)

#options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)

# Diagnostic/debugging support options
#options 	DIAGNOSTIC	# cheap kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	DDB		# in-kernel debugger
#makeoptions	DEBUG="-g"	# compile full symbol table
#options 	SYSCALL_DEBUG

# Compatibility options
options 	COMPAT_13	# NetBSD 1.3
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_43	# and 4.3BSD

# Executable format options
options 	EXEC_COFF	# COFF executables
options 	EXEC_ELF32	# 32-bit ELF executables

# File systems
file-system 	FFS		# UFS
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
file-system 	PROCFS		# /proc

# Networking options
options 	INET		# IP + ICMP + TCP + UDP
options 	NFS_BOOT_DHCP	# Support DHCP NFS root

#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages

# Kernel root file system and dump configuration.
#config		netbsd	root on ? type nfs
config		netbsd	root on wd0a type ffs

#
# Device configuration
#

mainbus0 at root

shb*	at mainbus?

# WatchDog Timer
wdog0 at shb? port 0xffffff84

com0	at shb? port 0xa4000000 irq 11
com1	at shb? port 0xa4000008 irq 12

# SH PCMCIA controllers
shpcic0	at shb? port 0xb000000a iomem 0xb8000000 iosiz 0x1000000
shpcic1	at shb? port 0xb000000c iomem 0xb9000000 iosiz 0x1000000

# PCMCIA bus support
pcmcia*	at shpcic? controller ? socket ?

com*	at pcmcia? function ?		# Modems and serial cards
wdc*	at pcmcia? function ?
wd*	at wdc? drive ?			# the drives themselves

ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
mbe*	at pcmcia? function ?		# MB8696x based Ethernet
ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
sm*	at pcmcia? function ?		# Megahertz Ethernet

pseudo-device	vnd		4	# disk-like interface to files
#pseudo-device	bpfilter	8	# Berkeley packet filter
#pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop			# network loopback
pseudo-device	pty			# pseudo-terminals
pseudo-device	clockctl		# user control of clock subsystem

# Enable the hooks used for initializing the root memory-disk.
#options 	MEMORY_DISK_HOOKS
#options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
#options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
#options 	MEMORY_DISK_ROOT_SIZE=3074	# size of memory disk, in blocks

#pseudo-device	md		1	# memory disk device (ramdisk)
